Top-rated pressure washers.

Get matched with top pressure washers in Bowdle, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your pressure washing project in Bowdle, SD?

Select your specific project to find the pro for you.

Find Pressure washers in Bowdle

Avatar for Lamb Painting

Lamb Painting

5.00(
4
)

Lamb Painting

5.00(
4
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Lamb Painting is a residential and commercial painting contractor providing high quality custom painting and related services to clients in the Northern Black Hills area who seek quality, value and integrity when they hire a painting contractor. We specialize in residential and commercial, custom painting. We also provide carpentry, drywall and general construction services. We’re in the business of protecting your property and the relationship we have with you. The best craftsmanship and products will be used on your project, which provides real value with a long lasting and attractive result.

Lamb Painting is a residential and commercial painting contractor providing high quality custom painting and related services to clients in the Northern Black Hills area who seek quality, value and integrity when they hire a painting contractor. We specialize in residential and commercial, custom painting. We also provide carpentry, drywall and general construction services. We’re in the business of protecting your property and the relationship we have with you. The best craftsmanship and products will be used on your project, which provides real value with a long lasting and attractive result.

Pressure Washing questions, answered by experts

Yes. You can pressure wash pavers. However, you risk damaging them if you use too much pressure or get too close. Use a PSI of 1,500 and spray the water at least 24 inches away from the surface.

Even at the lowest setting, there’s always a risk that pressure washing might damage your shower or tub. Never use this technique if there’s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.

Yes, you can and should pressure wash a stamped concrete driveway, as well as other stamped concrete around your yard on the patio or walkways. While the stamping pattern can handle the pressure of the water, it's still best to use a gentle solution to avoid breaking down the concrete or affecting any additional stain coloring added to the design.

The amount of pressure, measured in psi, that you should use depends on what you’re washing. Very tough materials like concrete, stone, and masonry can handle a high psi of 2,500 to 3,000, but materials like wood require a bit of a lighter touch. To clean your wooden deck, you’ll want to use your pressure washer on the lowest setting, around 600 psi, especially if it’s made of soft wood like pine or cedar.

This process doesn’t necessarily require soap or detergent, but it definitely helps. You can get by with just using water, but remember, brick requires a lower-than-average pressure level when compared to concrete, so forgoing detergent increases the time it takes to spot clean stains and debris once you finish with the pressure washer. Brick is especially porous, so the less water you use on it, the better.

The Bowdle, SD homeowners’ guide to pressure washing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"