Get matched with top mailbox repairers in Sunset, SC

To treat sun-damaged furniture, clean the surface thoroughly to remove dirt and debris. Next, assess the damage: Consider refinishing or applying a protective sealant for faded finishes. Apply furniture oil or conditioner to restore moisture to cracked or dry wood. Remember, the best way to treat your furniture is to prevent damage in the first place. Regular maintenance and preventive measures will keep your furniture looking its best. Lastly, it may be best to consult a professional furniture restorer or refinisher for expert repairs and restoration in severe cases.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

Yes, in most cases it’s a good idea to wrap furniture in plastic to protect it from dirt, dust, and damage during storage. However, natural and porous materials such as wood or leather should have breathable fabric covers to prevent moisture damage from condensation. Either way, it’s always important to ensure proper ventilation to prevent moisture buildup, especially in humid climates. 

Yes, you can fill rotten wood with expanding foam. You may prefer using an expanding foam treatment instead of wood filler since the latter can take a long time to dry. It may also provide an easier solution when you’re dealing with smaller gaps. If you use expanding foam, allow it to cure for about 24 hours before you sand and prime it.