Get matched with top sewer cleaners in Pelzer, SC

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Unlike regular cleanings, snaking your sewer line should be done as needed. There’s no reason to snake your sewer line if you don’t have any noticeable issues, like slow drainage or plugged drains. You can add it to your regular sewer cleaning checklist as a prevention method (on the same 18- to 22-month schedule), but it’s not always necessary. 

Outdoor plumbing issues are no less serious or urgent to fix than interior plumbing problems. These problems may require excavation and lawn repair due to the plumbing often being buried underground. The most common outside plumbing problems include:

• Clogged landscape drainage: $200–$1,000

• Clogged sewer lines: $60–$250 per linear foot

• Corroded or rusted pipes: $1,500–$15,000+

• Leaking drain lines: $200–$1,000

• Leaking water mains: $300–$4,000+

• Septic system failure: $600–$3,000+

• Tree roots in pipes: $200–$1,000

• Well pump failure: $350–$1,500

It can take anywhere from one month to a couple of years for tree roots to grow back in sewer lines. Tree roots can cause extreme havoc on your sewer lines, potentially cracking them and causing untreated wastewater to make its way into the groundwater. Have a landscaping pro remove trees and roots before installing your system, or call a pro to do it retroactively as soon as you can.