Get matched with top dishwasher installation pros in Smithfield, RI

Some signs that your dishwasher is going out include:

• The door no longer latches 

• Dishes are still dirty after a cycle 

• Dishes are cold after a cycle 

• Rust inside or outside the unit 

• Cracks inside the dishwasher tub

• Water collecting at the bottom or outside the unit

If your dishwasher is not energy-efficient or is older than 10 years, you should also consider replacing it. Repairing an older model may be more expensive than replacing it with something newer and more energy- or water-efficient.

Several signs can tip you off to a clogged dishwasher drain. At first, you may notice that it’s taking longer than usual for the dishwasher to drain, or you may hear gurgling sounds during the draining part of the cycle. You might also notice water backing up into your sink or excess food at the bottom of the dishwasher after a load. The most obvious sign, though, is seeing standing water at the bottom of your dishwasher after the cycle has finished.

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.