Get matched with top dishwasher installation pros in Braddock, PA

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

Not all dishwashers are 60cm wide, but that tends to be the most common size. 60cm translates into roughly 24 inches, with most home dishwashers being between 22 and 24 inches wide. There aren’t metrics available but it’s been our experience that over 90% of household dishwashers in North America are around 24 inches wide by 24 inches tall.

Yes, even a small dishwasher leak is a big deal. While it might seem minor, continuous unnoticed drips can lead to significant water damage to your kitchen floor, subfloor, and cabinetry. This damp environment is also a perfect breeding ground for mold, which can cause health issues and expensive mold remediation. Remember that water and electricity don't mix—having even a small leak poses a potential electrical hazard. Addressing any leak as soon as possible protects your home and avoids costly future repairs.

To get rid of standing water in your dishwasher, first try activating the drain mechanism by pressing and holding the cancel button for at least three seconds. If that doesn’t work, you’ll need to do some troubleshooting to drain the standing water from the dishwasher. This will involve shutting off the power, then scooping out the water, cleaning the drain filter, and clearing the air gap. You’ll also want to run the garbage disposal and check the drain hose for clogs.