"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."
"Excellent work. We purchased natural cherry cabinets in shaker style, with the panels made of solid wood rather than veneer. That is more difficult work, as each panel has to be constructed from several planks. Moreover, the clear finish would leave any flaws more visible. Simply put, the doors are beautiful--flawless in both construction and finish. They are similar in quality to custom cherry furniture we own."
"Ismail does a great job always when we hire him he has been making cabinets for us for years now every time we made new cabinets for our house or business he made all of cabinets so meticulously that we always go to him for any project we do highly recommend"
"The man I talked to was very professional and timely. However, he explained that this particular job was beyond the scope of what their company does. I would certainly use them on another 'issue'. "
"They were professional , meticulous , hard working and very respectful of our property . They were on time every day and put in several days of hard work sanding our decks , repairing where needed and staining . A wonderful crew to work with ! We highly recommend them ."
"We were in a time crunch to get this job done. They made room for us in their busy schedule and got our kitchen cabinets installed in half a day, and at half our budget! We would recommend JUST FINISH CARPENTRY to anyone in our area looking for quality finish work on your property. We also learned they can provide high quality cabinets at much more competitive pricing than the big box stores."
"The vendor scheduled the appointment, the crew showed up on time to review my roof maintenance requirements. Upon arrival they noticed my roof was a tile roof so they called John Jones who spoke to me and said they do not work on these types of roofs, apologized and offered to try and find someone else to honor the request. He indicated that he would contact Angie's list and clarify the Big Deal offer."
"I was not wild about them. It took me a long time to get hold of them and when they did send someone back they sent a couple of young guys. I had a handyman come out finish the work because I only had a couple of hours that I had bought and they weren’t finished. I understand that they had to leave the room and not finish painting it. I had a handyman coupon and so he painted it; he did a much better job than they did. I remember asking them to wash the wall and usual they wash the wall with a solution but they just picked up a wet rag and wiped it down. I just don’t know what they have done in one of the rooms because I did not say anything at the time. They just used masking tape on the woodwork and the paint can come through with the masking tape; it was not a good tape that they had used. They did not use the painters tape but just a masking tape. I had some good tape that I would have given them but I did not realize the tape that they were using so I did get a little paint on my woodwork. The guys that came out they were okay because they got to work and did not fool around but technically they were a little off. The paint looks okay."
"JB’s service was excellent. He listened to what I wanted and delivered beautiful results in a timely manner. If you need interior painting. He’s your guy!"
Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don’t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi’s contractor licensing tool to find out whether a potential carpenter is licensed in your state.
If you don’t have a power saw with a blade where you can adjust the angle, you could use a miter box and hand saw to make the cuts. The miter box contains wide slots to support the piece of baseboard and other narrow slots to accommodate the blade of the hand saw. However, it’s tough to make non-standard cuts beyond 30 or 45 degrees when using a miter box.
There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece.
Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.
Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.
The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.
It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.
Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.
Labor plays a significant role in the installation of butcher block countertops. Depending on who you hire, your location, the customization level of the project, and whether the wood is already finished, you may pay a professional between $10 and $150 per square foot to install a butcher block countertop. On average, expect the per-hour price to run between $60 and $100.
The Fossil, OR homeowners’ guide to woodworking services
From average costs to expert advice, get all the answers you need to get your job done.
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
