Get matched with top countertop and backsplash pros in Elgin, OR

Here are some things to avoid to help protect, maintain, and care for laminate countertops. Do not put hot pans or appliances directly onto the countertops because they can scorch the surface. Always use trivets and hot pads. Avoid using harsh, abrasive cleaning products and steel wool. Opt for hot, soapy water and a soft microfiber cloth instead.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

You most likely purchased a quartz countertop because it won't stain or etch like marble. However, etching can still happen depending on the quality of the quartz and whether it is repeatedly cleaned with harsh chemicals or exposed to acidic spills. Remember, while quartz is more resistant than natural stone, just like Superman when faced with Kryptonite, it is not indestructible.

You can make laminate counters look like marble by following the steps above. However, the condition of the laminate may limit the final results. For example, if the laminate is splitting at the corners or has sharp edges, the epoxy may not work or mimic natural marble as well.