"The concrete pad, “the apron” in front of garage door had raised over the years 3 1/2”. Brad and his one man crew came out, and tore up the raised pad, and found that tree roots from our neighbor had caused the pad to raise. Brad and company cleaned out the roots and poured a great looking pad in one day. Thank you Orton Team, great job."
"I had collected about three or four different estimates and Tim's price was lowest. I determined to see why it was lowest and see if I could endure that. Instead, what I discovered is Tim's job was way more than anybody else was offering instead of setting a 6 inch beam in my Spa slab. He said a 12 inch beam and he increased the rebar to half inch. But it really impressed me was another job he did for me on the sidewalk where the same as with the spa he used 4 inches of crushed rock compacted before he lay his forms out and then instead of using wire he actually use rebar. Basically he's an old-fashioned guy working in today's times where his work is more important than his profits."
"Brian's work is very professionally done. In addition to the cement work he completed a small addition to my deck. I have already recommended him to friends. It was a pleasure working with him."
"Hard Edge Construction, Jose and his partner did a fantastic job on carport pad. Cleaned up area well and what i thought was a great price. will recommend and will use again. Thank you Hard Edge Construction."
"I recently hired Travis to paint three of my buildings, and I couldn't be more thrilled with the results. From start to finish, the entire process was seamless and professional. The attention to detail was impeccable, and the quality of the work truly exceeded my expectations. Each building had its own unique challenges, but Travis handled them all with expertise and care. They were meticulous in their preparation, ensuring that every surface was perfectly prepped before painting. The final coats were flawless, with clean lines and an even finish that has completely transformed the look of my properties. Not only was the craftsmanship outstanding, but the team was also incredibly courteous and respectful throughout the project. They kept the work areas tidy and left everything spotless once the job was completed. I highly recommend Travis Foxhound Construction to anyone looking for a reliable, skilled, and dedicated painter. If you want a job done right, look no further!"
"Jerime and his wife were very considerate of finding the right product to use on my driveway . They performed in a professional way, cleaned up after they were done. They came at the agreed time. We are very satisfied with their work and would recommend them."
"I found TRM Construction very prefessional in every detail. They supported what I wanted to build, down to the smallest detail. They demostrated vast knowledge of the buildings trades, design work, and the building codes. They very dependibly, showed up to preconstruction meeting on time, and were very well prepaired. I have been very satified with TRM and recomend this company to others."
"Excellent, very professional work in a timely fashion. I would hire again and again and would recommend to anyone that is looking for a true custom concrete professional."
Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.
While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.
This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.
The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.
It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.
The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it.
Some of the most common metals used by welders include:
Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound
The Cave Junction, OR homeowners’ guide to concrete cutting services
From average costs to expert advice, get all the answers you need to get your job done.