Get matched with top sandblasting pros in Vici, OK

Sandblasting is useful when you need to strip material off a hard surface. Common reasons to sandblast are to remove paint, rust, or get a surface ready for a new material. You aren’t limited to surfaces like walls either—you can sandblast rusted tools, bicycle frames, cement, bricks, and many others. If what you’re sandblasting is still structurally sound, sandblasting can be a fast and inexpensive way to revive the original material. 

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

Sandblasting can be expensive, depending on the scope of your project and the materials involved. Costs can range from $700 to $12,500, but most homeowners spend $3,200 to have a 1,000-square-foot surface sandblasted. Sandblasting services cost $50 to $80 per hour, though most pros charge by surface area at $1.50 to $7 per square foot.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.