Get matched with top locksmiths in Sulphur, OK

You may be able to get a broken key out of a lock by yourself, depending on the situation. If a portion of the key is still protruding from your lock, try lubricating the keyway and using pliers or even a bobby pin to pull the key out of the hole. If you have jigsaw blades handy, you can also try using those to grab onto the stuck key and pull it out. 

But, if neither option works or you can’t reach the key, your only option is to call a locksmith for help. 

Over time, latch components may wear out or get grimy, leading to this problem. First, check for dirt, dust, or debris in the latch mechanism to ensure smooth operation. Use an aerosol duster and lubricant to clean and loosen. You may also need to tighten the screws in the component, adjust the strike plate, or replace the lock. If none of these steps resolve the problem, consult a professional locksmith.

Keyless locks are often considered safer since they’re protected by passcodes instead of a physical key, making it harder to be picked. However, they are not infallible. And like all electronic devices, outdated models are more prone to problems and safety concerns. If you’ve experienced multiple lockouts in the past year, or your lock is responding slower than usual after you key in the passcode, it might be time to upgrade to a newer one. Even if your lock is working fine, you should still change your access code at least twice a year.

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.