Best epoxy flooring pros near Skiatook, OK

Whether it's better to stain or paint concrete depends on your budget, desired aesthetic, and DIY skill level. Generally, staining is a more durable option because the stain soaks into the concrete's surface and won't wear away like a topical paint coating. Painting concrete can trap moisture underneath the paint layer, which may cause the concrete to deteriorate over time. However, concrete paint offers a wider variety of colors, is typically easier and less expensive to apply, and is effective at covering up existing stains or blemishes on the surface.

Epoxy tends to be the most durable concrete finish, holding up on garage and shop floors for years. Epoxy seals the slab's surface, will run into any cracks and crevices, and can help to level the surface, so it tends to be a durable finish for most applications. The downside to epoxy is that it can be difficult to remove once applied.

The cost to seal concrete is around $1,500 on average, but you could spend anywhere from $1,000 to $7,000, depending on the type of sealer used and the size of the space. You may want to seal concrete that receives a large amount of foot traffic or heavy wear. While you can seal concrete yourself with materials from a home improvement store, you must ensure the surface is clean and ready to accept the sealer. Hiring a professional is often recommended to ensure good, even coverage that provides adequate protection.

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.