Get matched with top interior painters in Jay, OK

WD-40 is an effective way to remove glue and other sticky residue from many surfaces, including wood. Spray the WD-40 on the area, allow the product to sit for a few minutes, then carefully wipe away the residue. As with other adhesive removal methods, test the WD-40 on an inconspicuous spot first to ensure it won’t damage the finish. 

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

This factor depends on exactly how much paint you remove from your hardwood floors. If it’s just a few small, hardly noticeable spots, refinishing won’t be necessary. However, if you completely strip your floors of paint, you will likely need to sand and finish them. 

Using a wire brush, forcefully scrub the surface to remove paint from metal. You’ll want to remove any lingering rust, too. For larger areas with caked-on rust, you may need to use a wire brush drill attachment. If the paint still won’t budge, apply a chemical paint stripper to the area and scrape off the paint, after following the paint stripper’s instructions.