Get matched with top garage pros in Drumright, OK

Insulating an unheated garage can still be worth it. For instance, insulating an attached garage can help with heat loss from your house in general, and it can also make it easier to store electronics in your garage without worrying about them being exposed to extreme temperatures.

If you use your detached garage as a workspace, insulation can still make a difference. Plus, you can use space heaters and a window unit AC to help condition the space while you work without installing heating.

It can take anywhere from a couple of hours to a day or two to clean out a garage. Times vary depending on the garage size, accessibility, and the amount and type of items that need sorting and lifting. A triple-car garage full of decades of clutter will take much longer to clear than a single garage with just a few unwanted bulky items.

It is highly recommended to prime a metal surface, like a garage door, before painting. Primer creates a stable surface for the paint to adhere to, which helps prevent bubbling, chipping, and peeling. This ensures the paint job will last longer. Painting metal without a primer can lead to poor adhesion and allow rust to bleed through the new paint. If the surface already has rust spots, you can cover them with a zinc chromate primer before applying the final coat. While priming adds an extra step and cost, it is a worthwhile investment for a durable, long-lasting finish. For best results, also use a paint specifically designed for metal.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.