Top-rated floor polishers.

Get matched with top floor polishers in Arnett, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Arnett, OK?

Select your specific project to find the pro for you.

Find Floor polishers in Arnett

Avatar for Punneo Cleaning Services
Punneo Cleaning Services
3.8(
4
)
Clean & Polish Flooring - For Business

Serving Arnett, OK and surrounding areas

In business since 2013

Free estimates

Emergency services offered

"This company is very willing to follow instructions and work hard. They have other services that I have not used as yet, such as carpet cleaning and laundry services. They bring their own cleaning supplies, but use my vacuum. After they are finished , they do a walk through with me to check to see if I am satisfied with their work. I feel I get a good value for the money paid.
"
Recommended by100%of homeowners
Request Quote
Floor Polishers questions, answered by experts

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Commonly used in garages, epoxy is a synthetic resin coating that goes over the top of concrete surfaces. If you’re deciding between polished concrete and epoxy flooring, the best choice depends on your needs and personal preference. Epoxy is durable and highly customizable, while polished concrete tends to require less maintenance. They’re both long-lasting with similar price points, and professional installation is recommended for each.    

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

Using too much soap or floor cleaner can leave your laminate floors looking dirty or cloudy after mopping. Only use a teaspoon of soap or cleaning solution in a gallon of water. Additionally, always be sure to sweep or vacuum laminate floors before mopping to ensure you pick up dried grit, hair, and dust that can be harder to catch with a wet mop.

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

The Arnett, OK homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles