Get matched with top stone and gravel pros in Struthers, OH

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

The cost of masonry work varies widely depending on the type of masonry along with common cost factors like size, complexity, location, and season. Most exterior masonry work done in freezing temperatures tends to cost more because of the preparation and protection involved to keep the masonry from freezing before the mortar cures properly. The average price ranges per project or square foot for different types of masonry include:

• Brick wall (fence, garden wall, etc.): $10–$45 per square foot

• Natural stone wall: $40–$110 per square foot

• Manufactured stone veneer: $20–$40 per square foot

• Brick home exterior: $10–$30 per square foot

• Brick siding: $3–$10 per square foot

• Stone siding: $35–$50 per square foot

• Brick step replacement: $20–$30 per square foot

• Brick wall repair: $20–$40 per square foot

• Chimney repairs: $160–$750 per project

• Tuckpointing: $5–$25 per square foot

The best type of rock for landscaping depends on your needs. If you want to build an affordable driveway, consider gravel. If you want an aesthetically pleasing patio, you can’t go wrong with flagstone. If you’re building a water feature, consider river rock as the base. Start by figuring out your landscaping project, then choose the best rock for that project.

Yes, limewash on brick can accumulate dust over time. Its porous nature can attract dust particles, especially in environments with high levels of dust or dirt. Additionally, if the limewash surface is left unsealed, it may be more prone to collecting dust. Additionally, incorrectly applied limewash will generate dust. Causes include applying it too thickly instead of thin layers and not allowing enough drying time between layers. Regular maintenance, such as gentle cleaning or dusting, can help mitigate dusty issues.