Get matched with top marble restoration pros in Steuben, NY

The cost to repair a stone countertop typically ranges from $200 to $800. The final price depends on several factors, including the type and severity of the damage, the type of stone, and labor costs. Minor issues like small cracks, chips, or scratches are on the lower end of the cost spectrum, while more significant damage that requires resurfacing, refinishing, resealing, or custom color matching will be more expensive.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

There are a few ways to remove calcium buildup in your pipes, but the most natural option involves vinegar, baking soda, and boiling water. To use this method, pour 1/2 cup of vinegar down the drain you're trying to clear, then follow it up with 1/2 cup of baking soda. Place a rag over the drain to create a light seal and leave it for 30 minutes. Remove the rag, then pour a pot of boiling water into the drain. After the water drains, wipe everything down with a sponge.