Get matched with top deck maintenance specialists in Scipio, NY

It’s important to make sure the wood on a new deck is properly seasoned. Seasoning a deck is simple: Once you build it (or have a pro do so), just leave it alone so it can acclimate to the environment. If you don’t give the deck proper seasoning time before staining, the stain can lock in any lingering moisture and cause mold, rot, and other moisture issues down the road. Give the wood at least four to eight weeks to season before you stain.

That depends on the condition of your deck. An older deck that looks drab, worn, or has multiple damaged boards might be worth replacing before selling. However, if your deck is in good condition, you can simply clean, repaint, or stain it.

A deck doesn’t have to be perfectly level. Many pros even recommend a gentle slope to ensure proper drainage and increase longevity. The ideal gentle slope is about 1/8 to 1/4 inch per foot away from the property, leading water away from the home to prevent pooling and reduce the risk of damage. It also minimizes rot, mold, and other moisture-related problems. 

Most building codes require that railing spindles (also known as balusters) on decks or stairs be spaced no more than four inches apart. This safety standard is often called the '4-inch sphere rule,' which means a sphere with a 4-inch diameter should not be able to pass through the opening between balusters. This rule is in place to prevent small children and pets from slipping through the railing. For the same reason, the space between the bottom rail and the deck or floor surface should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is essential to check your local building codes to ensure compliance before starting your project.