Get matched with top carpenters in Little Falls, NY

"BD Fence Solutions proved to be a highly professional company with excellent leadership and a great crew. They followed through with providing a beautiful fence installation in a timely manner, as promised. Happy to recommend this company to others."

"His work is very meticulous and trust worthy. I would recommend him for all types of work."

"This was a very involved plaster repair and remediation job, in a very old house. Grady is the only person (or company) who was willing to take on the job and drive all the way from Pennsylvania to our home in Northern Virginia. There are very few people who do this kind of work anymore (we really searched) and he is an expert in his field. We needed to work around his schedule, because he is in demand in the tri-state area, so it took awhile to schedule the work to begin... but it was worth it."

My name is Dan I have been working as a carpenter for a local union but decided to go different route in life. I work with my brothers on houses and we Do It All. No job is too big or too small. From small things like furniture install to stripping down your house completely and remodeling it we can Do It All.

"The main project (bathroom floor replacement, which was the original reason we hired MTH), and the side projects, went exceptionally well. Serge and Nick did an outstanding job.

Serge was affable and courteous. That was my wife's and my impression of Serge when we first met him. Unlike another contractor we interviewed for the project, Serge never tried to convince us to do more than what we wanted done. We explained to him the repairs that needed to be made, he understood them, and suggested on how best to address them.

The day after our initial meeting, and about a week before the project's start date, Serge emailed to us a contract that spelled out the work required, the cost of labor,  the payment schedule (no payment upfront; in fact, we paid a big chunk, about 40% of the total cost, after the projects were completed), and other terms of the contract. The cost of materials was not stated on the contract, but Serge gave us an estimate during our first meeting. We went over the estimate because of the side projects that we added later.

Serge regularly updated us on their progress and he gave us copies of the receipts for the materials he purchased. We knew where we stood.

The member of Serge's team who did most of the work was Nick. My wife and I were home for the duration of the projects, so we were somewhat aware of what he was working on at any given moment. We often wondered if he took breaks or ate lunch because he was constantly "on the clock." His diligence, and the quality of his work, which was first-rate, were commendable.

Nick did everything: tiling, drywall repair, painting, carpentry, plumbing, molding installation. He was a master of many. He did all those things while keeping the work area, and surrounding parts of the house, clean.

You can count my wife and me as another satisfied customer of My Town Handyman. We highly recommend Serge and his crew for your next home improvement project."

"The owner (Mike Januszka) is very personable, knowledgeable and competent. He worked with us to order and install an aluminum ramp from the garage into the house; and he and another workman installed a stairlift to adapt my 99 year old Mother's house so that she can continue to live in her home safely without having to move out into a Nursing Home at this time. We appreciate Mike's expertise and efficiency."

"Chris was very motivated and started the job promptly. His work ethic was great, staying late a couple of days late to complete job on time as agreed. He reviewed any issue found and was flexible when extra work was needed. The quality of the work was great in making the breezeway siding look the same as the garage, so with the paint job the house/garage improvement was dramatic. His pricing was reasonably and his clean-up appreciated. We would definitely recommend Chris to others and would engage him for work ourselves."

"Our exhaust fan/light was acting up and Mr. Jan came right out the same day and gave us a free estimate, and a convenient time that he could be back out. Mr. Jan was very polite and professional. He quoted us one price, however he was able to get the job done without extensive damage so he charged us less than what he quoted. A very well rounded gentleman. Thank you so much Mr. Jan. We really appreciate everything that you helped us out with we will definitely be giving you all the work that comes up around here. And we highly recommend you to anyone else. Great job we really appreciate what you did for us."

"Jason did a wonderful job"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"