Get matched with top carpenters in Dolgeville, NY

"Project consisted of tearing down 26 6x8 panels and replacing with new wood. I'm completely ecstatic with the job they did, and how fast it was completed. Bryce and his crew are fantastic."

"They did a panel upgrade from my house. They did a great job. Very polite very respectful. Very clean. Are we still in contact with me? Didn?t take them on the upfront took it all at the end when the job was completed. Did a very good job. I was very satisfied."

"Stephen is very dependable, takes pride in his work, and has great customer service. He is a master of his craft and is just an overall great person."

"I needed stucco repair work on an old chimney (and other spots). Grady was meticulous and thoughtful on what approaches and materials would work. Throughout the project they allocated sufficient time for each treatment to cure and inspected the work before proceeding to the next step. Grady started the project with no money down and only required ongoing payments for materials until the project was well underway. The final payment was due only after they did a final inspection. Total project cost was also below other bids."

My name is Dan I have been working as a carpenter for a local union but decided to go different route in life. I work with my brothers on houses and we Do It All. No job is too big or too small. From small things like furniture install to stripping down your house completely and remodeling it we can Do It All.

I am passionate about what I do, and I am always eager to help a customer. 315-558-1707

"The main project (bathroom floor replacement, which was the original reason we hired MTH), and the side projects, went exceptionally well. Serge and Nick did an outstanding job.

Serge was affable and courteous. That was my wife's and my impression of Serge when we first met him. Unlike another contractor we interviewed for the project, Serge never tried to convince us to do more than what we wanted done. We explained to him the repairs that needed to be made, he understood them, and suggested on how best to address them.

The day after our initial meeting, and about a week before the project's start date, Serge emailed to us a contract that spelled out the work required, the cost of labor,  the payment schedule (no payment upfront; in fact, we paid a big chunk, about 40% of the total cost, after the projects were completed), and other terms of the contract. The cost of materials was not stated on the contract, but Serge gave us an estimate during our first meeting. We went over the estimate because of the side projects that we added later.

Serge regularly updated us on their progress and he gave us copies of the receipts for the materials he purchased. We knew where we stood.

The member of Serge's team who did most of the work was Nick. My wife and I were home for the duration of the projects, so we were somewhat aware of what he was working on at any given moment. We often wondered if he took breaks or ate lunch because he was constantly "on the clock." His diligence, and the quality of his work, which was first-rate, were commendable.

Nick did everything: tiling, drywall repair, painting, carpentry, plumbing, molding installation. He was a master of many. He did all those things while keeping the work area, and surrounding parts of the house, clean.

You can count my wife and me as another satisfied customer of My Town Handyman. We highly recommend Serge and his crew for your next home improvement project."

"I had a plan of how I wanted my deck to look and projecbiz came through and made it happen!!! Moises arrived I gave him my idea and he took measurements, drew a sketch and came back the next day with an estimate that was great. I could not be happier with the outcome! They definitely took pride in their work and made sure that it was nothing short of perfect!! Thanks projecbiz!!"

"Very professional and pleasant to have around. We will be using them again and have told our daughter about them too."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"