Get matched with top sonic cleaning pros in Carthage, NY

It’s possible that installing solar panels can lead to mold on the roof. The panels themselves are not the issue. Problems caused by improper installation—such as roof leaks and mounts that aren’t sealed properly—can cause mold. Another potential cause of mold is debris accumulation under panels, which can trap moisture. If you live somewhere with extreme snow, rain, or hail, your home could be more prone to mold.

The easiest way to remove snow from a roof involves using a roof rake that allows you to clear snow from the ground. Roof rakes are lightweight and feature adjustable handles, making them user-friendly for most people. This method also helps prevent ice dams and excess snow buildup, reducing the risk of roof damage during winter months.

When should you remove snow from your roof? A good rule of thumb is once six inches of snow accumulates. 

Roof raking helps clear snowfall from your roof and, in turn, you hope that this prevents ice dams. But can roof raking actually cause them? Generally, no, it cannot. But you should note that while, in some cases, you might successfully prevent ice dams from forming near the edge of your roof by keeping it cleared with a roof rake, they could still form higher up on the roof, where you are unable to reach. This may leave you wondering: Does roof raking prevent ice dams? While it is not a 100% guaranteed way to prevent them, it does help.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.