Hi — I’m Andrew with First Step Insulation LLC in Williston. I specialize in residential insulation and air sealing to reduce drafts, cold spots, and high heating costs — which often leads to fewer tenant complaints and lower utility costs. I’m booking free, no-obligation estimates in your area and wanted to see if you have properties that could benefit from this.\nI’m fully insured, locally based, and have immediate availability.\nCould we set up a time for an estimate or meet briefly to talk about your maintenance needs?\n\nThanks,\nAndrew\n📞 (802) 735-4053\n📧 [email protected]
Home Shield Spray Foam is committed to excellence every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
Astar Heating & A/C Inc is a customer focused heating and air conditioning company that was originally started in 1976. Located in Middletown, NY, we employ highly trained people whose goal is to make our company the best service company in Orange County New York. Our company specializes in designing, engineering, and installing complete comfort systems for owners of existing homes and buildings just like yours. We take special pride in the craftsmen we train and employ a fact you'll notice immediately in the attitude and integrity they bring to your job site. Our entire company works hard to make your experience with us hassle-free and enjoyable. From the professionalism of our sales engineers, to the dedication of our field personnel, we are dedicated to delivering you the best. We take our responsibility very seriously when you place your trust in us. Additional DBA - Astar Heating & Air, LLC Additional email - [email protected] Additional phone - (845) 692-4858.
"Justin is a true professional and his crew go above and beyond to complete the job. While spray foam insulation is not cheap I feel that the job I received will pay dividends years to come. Justin is deeply committed to his community and I work beside him every year as volunteers to build our ice palace before winter carnival. His ethics are shown thru this work and it translate into his business. Thank you. dave"
"R-Factor Insulation Company does very good work. They insulated my crawl space and did a wonderful job. The owner Mr. Knapp was very professional and came out and gave a free estimate on the work. The job estimate was right on the price with no cost over runs at the completion of the job. I had other estimates that were much higher on the same work to be done."
"Roberto was the technician and he was very professional, polite, and personable. He inspected the rest of our system and told us things that needed to be changed or repaired. He showed me pictures of everything. Everything he told me about was accurate. He quoted me a price for R38 insulation , Some of our ducts were plastic and he recommended them to be changed. I agreed completely and didn't know they were plastic. I would have had them done the work but I had no price comparisons to make and besides I didn't have the money right then. So he just finished the vent cleaning and left his card. He did a great job on the vent cleaning and was happy with the work."
For years High Tech Construction Co. has been servicing its customers with efficiency, integrity, and Professionalism. Specializing in brownstone exterior restoration we strive to preserve historic brownstones from deterioration. Located in Brooklyn NY. Take tour of our website and gain insight into the core values and philosophies at High Tech Construction Co.
"We have had an intermittant water problem in our basement primarily when it rains heavily in the Winter. I was very happy with the quick response from Mike Sears when we initially called to ask about repairing a water leak problem in our basement. Mike explained how his proposed solution would work to alleviate the water problem. Mike left us with a detailed estimate and informational materials about the proposed repair. He also explained what wasn't included in the job such as tearing out the current sheetrock, insulation and framing from the wall. I did this part of the work and the reconstruction after the drain had been installed. We spoke to Mike a few days later, agreed to the price and set a date for the repair. On the scheduled date, two of Mikes employees arrived on time and began to prep for the repair. They did a good job of hanging plastic sheeting around their work area so that the dirt and dust would not get into the rest of the basement. We had discovered a crack in the basement wall which wasn't visible when the original estimate was given. Scott Lee gave us a written estimate to repair it with carbon-fiber cloth and sealant. While this was an unexpected expense, there was no reason to put in a drain and leave a crack in the wall. Taking out a basement floor with a jackhammer and installing a drain is a hard, dirty job. Scott and his co-worker completed this job in about 6 1/2 hours including the additional work for the wall crack. They did a good job of cleaning up the old concrete and all working materials Scott explained how the pump would work when the water table under the house rose. My only issue with quality was the uneven concrete finish work on the basement floor above the drain. Because this was leveled by hand, there is a somewhat noticeable depression in this area of the floor. Overall, I am happy with the work and looking forward to a dry basement when the rains come this spring.
Plumbing, Heating, Insulation... JT Mechanicals
\n
\nJT Mechanicals takes the guesswork out of selecting the best, most efficient heating, plumbing, and insulation products for your new home, or remodeling project. We use only the leading brands for radiant floor and hydroid heating, plumbing, and insulation.
\n
\nOur technicians are trained and certified on all of the systems we install. With over 50 years of combined experience, we are committed to delivering the highest quality at the most economical cost.
\n
\n
\n
It's essential to use insulation materials specifically designed for air ducts. Common types of duct insulation materials include fiberglass, foam board, and reflective foil. These insulation materials have the right properties to withstand the temperature and airflow conditions within the ductwork. Using the appropriate insulation not only ensures efficient temperature control but also prevents potential safety hazards or the release of harmful particles into the air.
On average, insulating an attic costs about $2,500, with a typical range of $1,500 to $3,500. The final price often depends on the attic's size, with costs generally falling between $1 to $3 per square foot. For example, insulating a 1,800-square-foot attic would likely cost between $1,800 and $5,400.
If the project involves removing old insulation, this can add an average of $900 to the total cost, bringing a full removal and reinsulation project to around $3,000.
Several factors influence the overall cost:
Insulation Type: Prices per square foot vary significantly by material.
Reflective: $0.50–$1.50
Blown-in: $1–$4
Batt: $2–$4
Loose-fill: $2–$5
Spray foam: $2–$5
Structural insulated panels (SIPs): $4–$7
Project Complexity: Factors like sealing air leaks, poor attic accessibility, and required inspections can add to the cost.
Removal Issues: The discovery of mold, asbestos, or pests during the removal of old insulation can substantially increase the price.
These two types of foams are similar chemically, but they are applied in a much different way and each has its own pros and cons. Spray foam can only be used if the area where you will be installing the installation is wide open and easy to access. Injection foam should be used where it's cost-prohibitive to remove the walls that are placed over the insulation. Spray foam is a much less expensive process and requires less expertise.
Garage doors that are not insulated can be a major source of heat loss. That’s why it’s essential to winterize your garage door with insulation and weather stripping to prevent heat loss and keep it warm more easily. Consult a local garage door installer if you need help determining the cause of your garage losing heat.
Plaster itself has a higher R-value than drywall. However, there are other considerations surrounding plaster and insulation. As a general rule, it's easier to obtain consistency in insulating value and quality when working with drywall rather than plaster. Plaster walls often don't contain any insulation behind the wall covering by design, and careful evaluation is necessary when choosing to add it.
The Altona, NY homeowners’ guide to insulation services
From average costs to expert advice, get all the answers you need to get your job done.
Learn how to decide if your home needs dryer vent insulation to protect your vent from drafts and moisture that can make your energy usage less efficient. Poorly ventilated dryer vents also increase mold risks!
Removing old insulation may be necessary for upgrading your insulation. Keep reading to see if you should remove old insulation before adding new insulation.
If your home’s temperature is uncomfortable or your energy bill is spiking, you should check your insulation. We'll help you find out if you should replace it.
