Countertops and Backsplashes questions, answered by experts
Since knowing how to install countertops correctly requires in-depth knowledge and understanding of the topic, we recommend hiring a professional countertops installer near you to work on this project. Kitchen countertops are a high-visibility investment, meaning mistakes made during DIY installation will be easy to spot, may cause damage, and potentially require re-purchasing materials. Professional countertop installers have the skills, tools, and experience to place your new kitchen feature safely and correctly.
Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.
The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.
It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.
Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.
Laminate countertops are great for bringing your kitchen countertop ideas on a budget to life, but they can become damaged and dull after years of use. To make laminate countertops look new again, you can use a laminate refinishing kit to fill in nicks and scratches and polish them to restore their original look. You can also paint laminate countertops to give them a new look.
The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.
Yes, countertop refinishing really works. It can help give your countertops a new and fresh look and extend their life by up to a decade. Countertop refinishing is a possible DIY project, or you can hire a pro if you prefer not to do it yourself.
The Mcdermitt, NV homeowners’ guide to countertop and backsplash services
From average costs to expert advice, get all the answers you need to get your job done.
Are you getting close to deciding on Caesarstone® countertops for your home? Discover all the details behind Caesarstone® countertop costs in this guide.
The cost of porcelain countertops is affected by many factors, primarily the material's type (tile or slab) and finish, as well as your counter’s size and shape.
From protecting your walls from cooking spatter to solidifying your aesthetic, these backsplash ideas will elevate the form and function of your kitchen.
