Get matched with top excavation pros in Ely, NV

Digging a well can cost between $20 and $25,000, depending on your needs. If you’re looking to dig a well yourself, all you need is a shovel. If you’re looking to have a well drilled by a professional, you can expect to pay around $15 to $30 per foot. The total cost of drilling a well will average to $5,500.

Hard soil could be a sign of overly dry dirt, either from poor drainage or drought. It's important to test the nutrient levels, density, and drainage capacity of your soil to see if it's absorbing water properly. Begin by adding a light layer of water and observing how long the soil retains moisture. If you experience a good deal of runoff, you may need to aerate your lawn, apply a wetting agent, or hire a professional for a closer look.

It takes two to three hours to trench 100 feet with a mechanical trencher or 10 to 12 hours if digging with a shovel. The total time to dig a trench depends on the depth, width, soil type, terrain, trencher type, and your level of experience. Digging in clay or rocky soil takes longer than soft ground.  

In most areas, you will need a permit for excavation work, even if the project only involves grading or yard leveling. Excavation permits help protect the topography in your area and can avoid issues with poor drainage. In most cases, your excavation company will know whether or not permits are required and will even pull them and close them out for you before and after the job. You can also verify whether permits are necessary by calling your local building department and explaining the proposed project.