Get matched with top pressure washers in Tohatchi, NM

Pressure washing your home or fence can make a major difference in the appearance and may even help extend the life of the structure you’re cleaning. Some of the most common areas that people pressure wash around their property include:

• Driveway: $100–$250

• Patio: $100–$200

• Fence: $150–$300

• Gutters: $50–$150

• Roof: $450–$700

• Siding: $150–$1,400

• One-story house: $150–$750

• Two-story house: $400–$1,400

• Three-story house: $700–$1,800

You should not use a pressure washer on any surface that it might damage. Examples include shingled roofs, glass, electrical components, and anything with a seal that might be stripped away by the pressure. There are a variety of different uses for a pressure washer. They're ideal for driveways, patios, garage floors, vehicles, fencing, gutters, and paint stripping.

Sodium bicarbonate does not need to be cleaned up as thoroughly as many of its aggregate counterparts because it is not considered dangerous to the environment, nor to pets or people. While you will likely want to clean up the dust with a shop-vac and some water for aesthetic and comfort reasons, soda blasting cleanup is much simpler than for most sandblasting.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.