Get matched with top pavers and hardscaping pros in Gallup, NM

In most cases, you don’t need a permit to repave your driveway, although some exceptions exist. If you’re widening your driveway and plan on widening the apron as well, you’ll usually need a permit from the Department of Transportation in your area. This permit costs between $50 and $300 in most cases. Most municipalities will also require a certified and insured contractor do the work relating to the apron and curb cut. You can contact your building department or ask your paving company if you need a permit. Your driveway professional will usually pull the permit for you.

Most professional permeable paver installations take between 2 and 7 days, depending on the size and complexity of the project. Small patios or walkways may only take a few days, while large driveways with deep base layers, edging, and drainage components can take a full week or more. Weather, access to the site, and whether demolition is needed also affect the timeline.

You’ll first need to install a base underneath your pavers for extra stability and drainage. Otherwise, the pavers can sink into the ground, and you’ll have to reinstall them. Use a base gravel layer of 4 to 6 inches for walkways and 10 to 12 inches for driveways. Compact your gravel layer every 2 to 4 inches so it’s nice and solid. After you install your gravel base, apply a 1-inch layer of sand on top.

Interlocking pavers can last for 50 years or more if they are installed correctly and properly maintained. The foundation is the most critical factor for longevity; a poorly prepared base will significantly shorten the patio's life. Routine maintenance includes applying a sealant regularly, managing any weeds that grow between the pavers, and avoiding harsh de-icing chemicals or metal shovels in the winter, as they can damage the surface over time.