Get matched with top countertop and backsplash pros in Cotton City, NM

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Yes, you can put hot pans directly on Dekton without causing any damage. Dekton countertops are extremely dense, which makes them highly resistant to heat. This density also makes Dekton nonporous and water-resistant.

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.

Yes, you can install a farmhouse sink on an existing countertop—but there are some caveats. You’ll need to precisely measure. It’s best to choose a sink that’s the same dimensions as your existing sink, since your contractor won’t have to cut the countertop. Otherwise, pay close attention to the depth of your counter (the front to back measurement). You don’t want to install something that’s so big it sticks out beyond your countertop and cabinetry.