Get matched with top countertop and backsplash pros in Cimarron, NM

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

While epoxy resin is generally durable, it is not scratch-proof. Some sources state it is highly resistant to scratches from minor sources, while others note it can scratch and chip easily from sharper or heavier items. To prevent damage, always use a cutting board and avoid sliding heavy or rough-bottomed objects across the surface. If a scratch does occur, be aware that epoxy can be difficult to repair by sanding, often requiring an orbital sander for effective results.

Granite countertops cost an average of $3,250 compared to $2,250 for tile countertops. Granite is also harder to DIY than tile, given its weight and bulk, which increases the overall labor cost of installation. Over time, both types of countertops may need sealing to remain resistant to water, heat, and other common kitchen elements.

Gray is always a safe bet when painting concrete countertops, since concrete is a variation of gray. You may also choose black or white, but those are much starker colors that only do well in certain kitchens.