Get matched with top concrete cutting pros in Warner, NH

Q: How do I maintain custom or fabricated metal structures?

• <div><p>To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.</p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: Can you cut up a box spring?

• <div><p>Yes, you can cut up a box spring., but you&rsquo;ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete cutting project in Warner, NH?

Select your specific project to find the pro for you.

Verified Reviews for Concrete Cutting pros in Warner, NH

*The Angi rating for Concrete Cutting companies in Warner, NH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

*The HomeAdvisor rating for Concrete Cutting companies in Warner, NH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

Last update on August 30, 2024

Reviewed in August 2024
Pg concrete answered first call. Showed up for site visit on time. Gave a very fare price. I hired then on the spot. The did exactly what they said they would. There work came out perfect. I highly recommend them.
PG Concrete Construction
Request a quote
Reviewed in June 2024
DO NOT USE NH MASONRY AND CONSTRUCTION NH Masonry and Construction, with Gerry at the helm, does bad business. We have multiple separate contracts with this company, for a variety of projects. Not one single project is complete. They have not finished the stucco of the foundation, failed to...
NH Masonry & Construction
Request a quote
Reviewed in March 2024
We contacted Jim after a word of mouth referral, and he came out the next day! Had some great input on how to best utilize the area, knew the regulations for our town and mapped everything out easily for us! Was very friendly and personable, took great care of the property, was on site both days...
JY Paving & Decorative Asphalt
Request a quote
Reviewed in October 2021
Ian was prompt, courteous and did an excellent job removing a significant amount of cut trees, brush and yard debris from my property. He was on time, communicated clearly about his progress and kept to our agreed upon budget. He is an efficient and very hard worker.
Ian's Handy
Request a quote
Reviewed in October 2021
Darel took on the challenging task of rebuilding the support system of my large second floor deck. He was very innovative in his approach and figured out where to poor new concrete footings. He built a sturdy timber structure to support the deck. He was responsive, thorough and did a great...
Darel Demers Services
Request a quote
Reviewed in November 2020
Agustion Ramos from JE Masonry and his crew, did a fantastic job. They were on time, quick, never cut a corner, polite, added great suggestions and the job site was neat and clean every night and when job was complete , Would highly recommend.
JE Masonry & Landscaping, Inc.
Request a quote
Reviewed in September 2020
I needed a concrete slab and ramp for a garage. I received a quote from them that was reasonable. They started the project right away, made sure I was informed of the progress, and completed the job to my complete satisfaction. I highly recommend this company, you won't be disappointed!
Custom Concrete NH
Request a quote
Reviewed in September 2020
I am very pleased with the efficient and professional job that was done. The clean up after cutting the trees was immaculate. I would definitely use Cline's Property Services again.
Cline's Property Services
Request a quote
Reviewed in February 2020
Did an amazing job ! Was professional and efficient. Helped with suggestions that would improve and cut cost later on.
NW Painting & Handyman Services
Request a quote
Reviewed in November 2019
Tends to do the bare minimum of what is required. Asked for a final cutting-not done mower s put away.
SLK Yard Services
Request a quote

Find Concrete cutting pros in Warner

3 Brothers Masonry

4.7(

)

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

Approved

Super Service Award Winner

In business since 2008

Free estimates

Credit card accepted

"Very responsive and fair. I would recommend them for any concrete or stone project."

Front entry brick rises and granite treads

Response time4 hrs

Response rate93%

3 neighbors recently requested a quote

Request Quote

Quantum Contracting, LLC

4.3(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Warner, NH and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

"Tyler is great! Responsive, honest and fair. He was a pleasure to work with!"

+23

Response time2 days

Response rate89%

13 neighbors recently requested a quote

Concrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

Approved

Super Service Award Winner

In business since 2019

Free estimates

Small jobs welcome

"I have used John not only for my home but also my two businesses. Large and small projects. He is a great mason as well as a great landscaper."

+19

Response time2 days

Response rate95%

Recommended by60%of homeowners

Request Quote

Parkway Masonry and Construction INC

4.2(

)

Concrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

Approved

Super Service Award Winner

In business since 2021

Free estimates

Emergency services offered

"Very happy with parkway masonry and construction we had troubles with water seeping into our basement they got the issue resolved great team of guys"

Response time1 day

Response rate98%

37 neighbors recently requested a quote

Request Quote

The Finish Line

New to Angi

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

Approved

Small jobs welcome

Offers commercial services

I’ve got 25 plus years in the construction industry. Fully equipped and capable to handle everything from cabinet and furniture finishing and refinishing, interior/exterior painting , epoxy floor coatings.\nConcrete flatwork installation and repair Including stamped and other decorative finishes. Concrete wall and stucco repair. Concrete and masonry stair repair and restoration. As well as Carpentry framing to finish. I take pride in the ability to take on and complete all sorts of construction projects in a timely and professional manner.

Request Quote

Houghton works

New to Angi

Concrete - Sawing or Removal

Serving Warner, NH and surrounding areas

Approved

Love what I do. Great listener. Always professional and clean

Request Quote

Sonart Construction Corp.

2.3(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

Approved

In business since 2013

Free estimates

Credit card accepted

"I recently had my shingle roof replaced and I?m very happy with the results. The team was professional, punctual, and completed the job efficiently. The quality of the work is excellent, and the new roof looks great. They kept the work area clean and communicated well throughout the process. I would definitely recommend them to anyone needing a roof replacement."

Request Quote

Hansen Contracting

New to Angi

Concrete - Sawing or Removal- For Business

Serving Warner, NH and surrounding areas

Approved

Hansen Contracting has more than 25 years of experience for all of your contracting needs. We specialize in new residential construction as well as general home remodeling.

Concrete Flatwork - Repair & Resurface

Serving Warner, NH and surrounding areas

In business since 2019

Free estimates

Emergency services offered

"St John Enterprise provided a professional service at an affordable price. Their communication and customer skills are excellent. They showed up on time and worked efficiently to deliver high quality work. The patio and front step have received many compliments, and truly exceeded my expectations. I will definitely hire these guys again any time I need concrete work done!"

+73

Recommended by100%of homeowners

Request Quote

Grunts Move Junk and Moving

5.0(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Warner, NH and surrounding areas

In business since 2014

Free estimates

Emergency services offered

"This team provided responsive customer service. They were quick and professional on site."

Recommended by100%of homeowners

Request Quote

...

Showing 1-10 of 52

Concrete Cutting questions, answered by experts

To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

The Warner, NH homeowners’ guide to concrete cutting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Stephanie Mickelson
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Cut a Concrete Wall for a Door? [2026 Data]
Looking to add utility and easier access to your basement? Use this guide on the cost to cut a concrete wall to add a door to your basement.
Haley Nothstein
•
Jul 15, 2026Jul 15, 2026
How Much Do Poured and Precast Concrete Walls Cost? [2026 Data]
Discover how much concrete walls cost based on factors like their size, material, location, design, and local labor rates.
Xiao Faria daCunha
•
Sep 16, 2026Sep 16, 2026
How Much Does Concrete Removal Cost? [2026 Data]
Time to get rid of that old chipped and crumbling walkway? Concrete removal costs can add up, but you have options to simplify the process. Learn more here.
Dan Simms
•
Aug 5, 2026Aug 5, 2026
How to Cut Concrete for All Skill Levels
Cutting concrete is a daunting task unless you have the right tools and know-how. Find out the methods for how to cut concrete for all skill levels.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
How to Cut Concrete Pavers: 3 Methods to Do the Job Correctly
Have a paver patio project and need to know how to cut concrete pavers? Find out all the DIY options you have for getting your pavers to fit properly.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
Ultimate Concrete Tools List for Your Home Projects
Looking to tackle concrete projects in and around your home? Use this concrete tools list to make sure you have the right tools to get the job done.