Get matched with top drain cleaners in Epsom, NH

The most common cause of a clogged sump pump is natural debris buildup. As water enters the sump pit, it can carry small pieces of debris that build up over time, or the debris can get caught in the filter. If you forget to cover the pit after cleaning the sump pump and pit, debris can also collect in the pit. Corrosion on the metal discharge pipe can also clog the pump. Additionally, if your pipes freeze, it can prevent water from draining properly and cause a clog.

If methods like hot water or a plunger don’t work on your clogged drain, you can snake your drain to dislodge the plug. This can be a messy process, taking some physical effort and additional time over the other drain-clearing options. You can purchase a drain snake at a hardware store and choose from handheld options or those attached to a drill. Just work slowly, and be ready to call a plumber if you’re unable to reach the clog from your drain or P-trap.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

There are a few ways to unclog a toilet without a plunger. Break up the clog with homemade solutions containing soap, vinegar, and baking soda, or simply let hot water spend some time in the drain. You can also use a two-liter soda bottle filled with water to push pressurized water into the pipe to dislodge the debris (see the steps above).