Get matched with top drain cleaners in Bennington, NH

Flushing the toilet only to realize it’s clogged can cause anxiety. To avoid a clogged toilet, use less toilet paper. If you notice that the toilet is flushing and refilling slower than usual, you can use a plunger to clear clogs in the S-trap. If that doesn’t work, call a plumber to check your system and possibly clear the drain lines.

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

The best way to unclog a bathtub drain is to pour a pot of boiled water down the drain, being careful not to splash yourself. However, take precautions, as boiling water can damage PVC pipes and joints. Follow up with ½ cup of baking soda and ½ cup of vinegar. Cover the drain with a small sink plunger and let it sit for 15 minutes. Pour boiling water down the drain again and replace the drain stopper.