Get matched with top pressure washers in Niobrara, NE

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

No, pressure washing isn’t recommended for cartridge filters. The high pressure can damage the filter paper, and the gentler pressure from a regular garden hose will work to rinse the cartridge filter. If the cartridge is very dirty or has algae or mineral buildup, you can use a muriatic acid solution to soak the filter and remove the buildup.

The best PSI to pressure wash a driveway is 3000 PSI whether you have a concrete or asphalt driveway. This PSI allows you to deep clean a driveway without damaging the surface while removing debris, dirt stains, and even oil spills. Choose a surface cleaner attachment to help deep clean the driveway with ease.

Hardscaping is made to withstand the elements, but it still needs regular cleaning as well as maintenance like weeding, replacing broken pieces, removing mold or mildew, and more. Use an appropriate cleaner for the hardscaping material with a stiff brush to remove dirt and other material, or use a pressure washer for a deep clean. Staying on top of maintenance can alert you to any problems with your hardscaping that will need repair or replacement.