Get matched with top stone and gravel pros in Mullen, NE

No, you don’t need to soak the brick before cutting it by hand. In fact, cutting a wet brick can make it harder to see your score lines and may cause the chisel to slip. Soaking is sometimes used with power tools to reduce dust, but for hand-cutting, it’s best to work with dry bricks for better control and visibility.

Yes, brick should be clean before staining to ensure the best results. Dirt, dust, mold, mildew, and other substances on the brick can prevent the stain from properly adhering to it. Thoroughly cleaning the brick allows the stain to penetrate and bond to the surface more effectively. Cleaning typically involves using a pressure washer or a stiff brush with mild detergent. However, stubborn residue may require a specialized masonry cleaner.

It is possible, albeit a lot slower, to break up a rock using water. You would do this by freezing and thawing the water. You could create some initial holes or cracks in the rock, then pour water into the cracks or holes and allow them to freeze (so it's best to do this in winter or in colder climates). Since water expands when it freezes, this puts pressure on the inside of the rock and causes it to crack. You could continue to pour more water in and let it freeze to continue to break up the rock.

The premise for painting a brick building is fairly simple: Prime the bricks to seal the surface and apply the top coat to protect your brick home. However, it’s easy to miss a few important steps if you’re starting from a raw brick surface and don’t know the basics of how to paint brick. So be sure to reach out to a local professional painter if you have any reservations about correctly painting your brick house.