Get matched with top furniture refinishers in Mccook, NE

The difference between resurfacing and refinishing is that refinishing only works on solid surfaces that are in good condition, whereas resurfacing will restore a cracked or worn surface to its original, blemish-free state. Refinishing will leave you with a smooth and glossy surface you can’t get from resurfacing alone. If that’s the look you’re going for, contact a local concrete finishing contractor to achieve it.

Sometimes you will need a stronger cleaning solution to thoroughly clean furniture before painting. It’s best to start with a mild solution to avoid damaging the surface, especially if it is an antique piece. If you need to use a stronger mixture, try a commercial cleaner or mineral spirits. Before applying any solution, do a test patch on an inconspicuous area so you don’t risk damaging the finish.

It is possible to refinish your own furniture, but it’s usually a good idea to leave the work to the professionals. Furniture refinishing often requires the use of paint stripper or solvents to remove existing finish, which can be dangerous to inhale. Additionally, it’s easy to make mistakes during the process that could permanently damage your piece, limiting its lifespan instead of extending it. Hiring a furniture refinishing professional is especially worthwhile for antique furniture, which often requires more delicate refinishing work.

It takes the average person four to eight days to refinish a table. This sounds long, but the work time is only two to 10 hours. If you have prior experience, each step, including dipping, stripping, sanding, staining, painting, and sealing, can take just 30 minutes to complete. The wait time between each step results in a longer total time.