Get matched with top mailbox repairers in Lyons, NE

Yes, you can fill rotten wood with expanding foam. You may prefer using an expanding foam treatment instead of wood filler since the latter can take a long time to dry. It may also provide an easier solution when you’re dealing with smaller gaps. If you use expanding foam, allow it to cure for about 24 hours before you sand and prime it.

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.

Careful measurement is crucial—measure multiple times and account for hardware thickness, seasonal wood movement, and clearance requirements. Test-fit components before final assembly, and consider building one drawer as a prototype before cutting materials for multiple units.

If you don’t want to purchase furniture sliders, there are several household items that can be used as makeshift sliders. Thick towels or blankets placed under furniture legs can reduce friction and make it easier to slide the furniture without causing damage to the floor. Additionally, plastic or paper plates can be placed under each leg for easy sliding. You can also cut up pieces of a cardboard box to slide beneath the legs of the furniture.