Q: How do you prepare a shower before caulking?

• <div><p>Before you begin caulking a shower, you&rsquo;ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to <a href="https://www.angi.com/articles/how-clean-mold-mistakes-avoid.htm">get rid of the mold</a>, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter&rsquo;s tape&mdash;one above the joint where you&rsquo;re caulking and another below it.</p></div>

Question 1

Can you fix a hole in a plastic bathtub?

Accepted Answer

•

You're more likely to accidentally crack your plastic tub rather than successfully fixing a hole. You can fix hairline cracks and larger stress cracks with a plastic tub crack repair kit from a home improvement store. You'll need to clean out the tub, apply either the epoxy resin or filler putty compound into the crack, let it dry, and then sand it out.

Depending on your budget, you might consider a new tub as part of your bathroom remodel costs. It could be a good opportunity to update everything after considering all of the bathroom remodel ideas out there.

Question 2

How long does it take to refinish a bathtub?

Accepted Answer

•

For a standard-sized bathtub with minor damage, it takes approximately 3 to 5 hours to refinish. It might take a bit longer if your bathtub refinishing contractor needs to fill in significant cracks or gouges. This is the same if you have a specialty tub, like an oversized bathtub—you can expect your pro to take a bit on the longer side.

Question 3

How do you prepare a shower before caulking?

Accepted Answer

•

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.

Question 4

What causes a bathtub to chip?

Accepted Answer

•

Bathtubs chip for a number of reasons. The primary cause is simply an accumulation of accidents or direct impact from objects over time. Heavy items will do this, like an iron, but so will lighter objects, like shampoo bottles, especially if you drop them from high enough.

Question 5

Do acrylic tubs crack easily?

Accepted Answer

•

Acrylic tubs are extremely durable and rarely chip or crack. Even when frequently used, tubs made with this material are largely resistant to damage. However, damage may occur as the tub ages. They can also crack from damage from heavy objects and cleaners or a lack of support.