Get matched with top ceiling fan pros in Henderson, NE

It’s possible to install your own ceiling fans if you’re replacing an existing one. This work doesn’t require a permit and technically doesn’t necessitate a certified electrician, but it’s still a good idea to hire one. There’s always a safety risk when working with electrical components, even if you shut the power off at the breaker. If you’re installing a new ceiling fan where there currently isn’t a fixture, you will need a licensed electrician to run the new wiring and pull permits for the work.

If the fan doesn’t have a switch, connect the white wire from the ceiling to the white wire from the fan; connect the green wire to the ground wire; connect both black wires; and connect both blue wires. If yours has a switch, the white and green wires are connected the same way. However, connect the ceiling’s red wire to the light’s black wire and the ceiling’s black wire to the fan’s black wire. 

To convert a ceiling fan to wireless, you’ll need to install a canopy module to access the lighting and fan controls. Many options are available, all of which help you control specific elements of your ceiling fan, so you have plenty of choices depending on your needs.

Fan power is measured by CFM, or cubic feet per minute. For every 1,000 feet of square footage in your attic, you need a minimum of 700 CFM. Steeper roofs may need larger fans or about 840 CFM.  You can figure the size of attic fan you need by multiplying the square footage of your attic floor by 0.7. (multiply by 1.2 for a steep roof and 1.15 for a dark roof). That number is the CFM required for your fan to run efficiently.