Get matched with top solar panel pros in Elgin, NE

You’ll need to make sure you have a big enough solar panel to meet your well pump’s power demands, but you can use solar power to fully operate your well pump. It’s also a good idea to have battery storage to hold the solar power so you can still use your well pump after dark.

Solar panels should get at least four to six hours of direct sunlight daily. It’s even better if sunlight reaches panels between the peak hours of 10 a.m. and 3 p.m. This is enough to power a home, depending on your solar system’s size and energy needs. Remember that panels will generate some power under cloudy skies or in the shade, and many systems compensate for lower sun exposure by drawing energy from the grid or battery storage.

In almost every case, solar panels need to be removed to replace roof shingles. In some cases, such as solar installations where the panels are on raised platforms above the roof surface, installers may be able to install new shingles without removing the solar installation. However, to get a quality roofing installation, panels need to come off. Most roofing contractors won’t remove or reinstall solar panels as part of a roofing project, so you’ll need to contact your solar provider.

Solar well pumps range from needing 200 watts of power to as much as 12,000 watts for heavy-duty pumps. Since the most common and cost-friendly solar panels are 100-watt panels, you’ll need between two and 12 panels. The average is between two and eight panels for standard pumps. Based on the average cost of solar panels ($1 to $1.50 per watt), you’d pay between $200 and $1,800 for your well pump solar panels—not including installation.