Get matched with top deck maintenance specialists in Bayard, NE

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.

Deck skirting shouldn’t touch the ground, especially if you have a wood deck, which is vulnerable to moisture. Ideally, you should leave at least 3/4 of an inch of space between the deck skirting and the ground for more ventilation. Pros also recommend that you incorporate about 1 square foot of space for ventilation for the underside of the deck to every 150 square feet of decking. Proper ventilation prevents mold growth and rot that can damage your deck.

There are several methods for attaching stair stringers to a deck. The best way is to bolt the stringers to the deck joists using three carriage bolts in a triangular pattern. This method offers the sturdiest fit for stairs that won’t budge. Alternatively, attach the stringers to the deck rims using lag bolts or to the posts using adjustable slope hangers.

While the chemical, copper-based coating on pressure-treated wood offers protection from rot and pests, it’s not a silver bullet. An added sealant will help protect the wood further, though sometimes the wood is treated in a way that causes premature failure, and this is largely out of your control. It’s simply a case of bad luck. Regularly inspect all your house’s wood to look for any cracks or signs of mold and mildew. Getting ahead of the problem is the key to ensuring it doesn’t grow out of control.