Get matched with top pressure washers in Bassett, NE

It takes about 15 minutes per each side of an exterior house to apply detergent and 15 minutes to remove it, so you’ll need roughly two hours for the whole job. However, that length of time may decrease or increase depending on the size of your home, so always budget a little more than expected to ensure you don’t end up rushing to get it done.

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

Most powerwashing jobs take 2-6 hours, but larger buildings or areas with deep staining may require an entire day.

Yes, you can use a pressure washer to help with deck paint removal. One of the benefits of pressure washing is its speed. However, a pressure washer is best used with a paint stripper. A paint stripper helps the paint lift from the wood, and then you can use the pressure washer to remove the paint effectively. To increase the longevity of the wood, you want to avoid using more than 1000 PSI on your pressure washer, as too much moisture will penetrate the wood and may cause mildew or rot.