Get matched with top pressure washers in Sargent, NE

Once you see how well your pressure washer cleans, it’s easy to get carried away and want to blast everything. But some surfaces handle pressure washing better than others. Avoid pressure washing anything electrical, painted (unless you want to strip the paint), or delicate, like glass. And even though you can pressure wash wood or other porous surfaces, select a lower-powered pressure washer and wide-angled nozzle to prevent damage.

A good PSI for a pressure washer will depend on the job you're doing. Pressure washer PSI ratings range from 1,300 to 4,200 PSI. Lower PSI is suitable for cleaning dirt and debris off of softer materials. Use a low PSI when pressure washing vinyl siding , wood, or stucco. A heavy-duty job like cleaning graffiti off of concrete or brick will require at least 2,000 PSI.

Pressure washing a wooden deck can lift ingrained dirt, mold, and mildew, making the space look more inviting and increasing its longevity. However, you risk damaging the porous surface if you DIY deck pressure washing and go in too powerfully or at the wrong angle. Pick a white pressure washer nozzle that sprays with a gentle 40-degree fan pattern, and keep some distance while spraying.

Most deck lumber is softwood that you can easily damage with the spray from a power washer. Most power washers, though, have a lower pressure setting that’s relatively safe for deck materials if you’re careful to hold the nozzle at least a foot from the surface and continue moving without hovering in one area.