Get matched with top fireplace pros in Turtle Lake, ND

No, not all chimneys need a damper. However, most chimneys do, especially in newer homes. Most gas-burning fireplaces cannot function safely without a damper. Only some older wood-burning fireplaces can function safely without one. A chimney without a damper is essentially just an open hole in the roof of your home.

While you have some flexibility in the types of wood you can use in your outdoor furnace, it's important to make wise choices for optimal performance and efficiency. Hardwoods, such as oak, maple, and cherry, are generally recommended for their higher energy content and cleaner burn. These hardwoods produce more heat per volume and tend to produce fewer creosote deposits, which can accumulate and cause a chimney fire, according to the U.S. Environmental Protection Agency.

Gas fireplaces provide energy-efficient heating, low maintenance, and the convenience of instant ignition with remote control options.

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.