Get matched with top stucco pros in Lisbon, ND

The average cost to repair stucco is about $1,600, with projects ranging from $250 for minor fixes to $6,700 for extensive work. The price is often calculated per square foot, typically costing between $60 and $120. Some professionals may charge an hourly rate of $40 to $50. The final cost depends on the extent of the damage, the type of stucco, your home's location, and whether there is underlying damage that also needs to be addressed.

Costs for specific repairs vary:

• Cracks: $8–$20 per square foot

• Holes: $250–$450 per hole

• Water damage: $30–$50 per square foot

• Chimney repair: $60–$120 per square foot

• Recoating: $4–$5 per square foot

While you may be able to patch small cracks yourself, it is recommended to call a professional for major repairs to ensure the job is done correctly.

German schmear is a durable brick masonry coating. It should last at least a decade or two without flaking or fading, even with minimal maintenance. This makes it an economical option compared to the cost of painting your house exterior, which usually needs to be repainted every five to 10 years to keep it looking its best—thus costing more over the same time period.

The decision to repair or replace stucco depends on the extent of the damage. For minor issues like small cracks, holes, dirt, stains, or discoloration, a repair is typically sufficient and more cost-effective. These issues can often be resolved with a simple repair, a deep clean, and possibly a new coat of paint. However, for more significant problems such as large cracks, peeling, mold, algae, or structural water damage, a replacement might be necessary. In these cases, it is best to call a professional stucco contractor for an inspection. An expert can assess the severity of the damage, determine if there are deeper issues, and advise whether a repair is adequate or if replacing a section or an entire wall is the more cost-effective, long-term solution.

Masonry screws are the best option to be used on stucco. They’re thicker and made to penetrate harder surfaces like concrete and cinder blocks. Fluted masonry screws work the best because they create a stronger grasp thanks to the lines on their shafts. If you’re working on exterior stucco, use galvanized screws to prevent corrosion.