Get matched with top countertop and backsplash pros in Center, ND

New countertops can last for anywhere between 15 and 50 years, with the exact lifespan depending on the material:

• Quartz: 50 to 100 years

• Marble: 50 to 100 years

• Granite: 50 to 100 years

• Laminate: 15 to 20 years

• Concrete: 20 to 30 years

• Tile: 40 to 100 years

Keep in mind some materials are more likely to stain and chip than others, which is an important factor to consider when it comes to the longevity of your countertops. Some materials also need special cleaning and maintenance, like tile countertops, which need grout cleaning, and concrete countertops, which need resealing.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The short answer is yes. A stone-safe, pH-neutral cleaner and a soft cloth are all you need to clean and maintain terrazzo. Harsh cleaners aren’t necessary. You can also apply stone polish every few months to refresh your terrazzo.  

It’s recommended that you clean your terrazzo countertops daily to remove dust before it begins to build up. Dust and other debris can cause small scratches over time. If you spill something, be sure to clean it up immediately before stains set in.

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.