Get matched with top energy efficiency auditors in Cavalier, ND

As you look for the right soundproofing drywall for you, you’ll likely come across the Sound Transmission Class (STC) rating. This rating measures a building material’s ability to absorb sound. The higher the number, the better the material absorbs rather than reflects sound, reducing noise transmission. The STC rating for drywall doesn’t mean it’s for the panel itself—it refers to the STC rating for the entire wall system, including the soundproofing drywall.

The effect a gas fireplace has on your gas bill will depend on how often you use it, the size of the rooms you’re heating with it, and the BTUs of the fireplace itself, but generally speaking, it should only cost a few cents an hour to run it when it’s on. It will consume minimal energy when it’s “off” if you have a pilot light running constantly, but some modern gas fireplaces don’t require a constant pilot light.

You can determine what size generator you need by listing the various appliances it will power during an outage. Write down the start-up watt usage, and then add them all together. 

A 7,500-watt generator will run your refrigerator, freezer, well pump, and lighting circuits without a problem. However, you’ll need an extra 3,000 to 4,500 watts to run your water heater and another 5,000 to 25,000 watts to run your electric furnace. In these instances, a whole-home generator is your best bet for running your critical equipment.

Home power is measured in kilowatt-hours, commonly expressed as kWh. The average home uses between 800 and 1,000 kWh per month. Peak usage (and highest bills) occurs in the middle of summer and the depths of winter. Keeping on top of your usage during these crucial months will lower your annual average usage considerably.