Top-rated concrete cutting pros.

Get matched with top concrete cutting pros in Tyner, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete cutting project in Tyner, NC?

Select your specific project to find the pro for you.

Find Concrete cutting pros in Tyner

Avatar for LARC,LLC
LARC,LLC
3.4(
5
)

Serving Tyner, NC and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"The service was excellent and superb. When I called them, they came right away for the quotes and estimates then did the job. It was a very stat turn around time. Good price, actually the cheapest. The best quality of work. I highly recommend this company."
After
Framing
Almost done
New front steps
Custom steps

+8

Recommended by60%of homeowners
Showing 1-10 of 11
Concrete Cutting questions, answered by experts

To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.

You should not do your own welding unless you have the proper training and experience. Most home electrical systems can only handle MIG welding, which creates weaker bonds than TIG welding and won’t work on certain metals or metal thicknesses. Both welding forms usually require the use of shielding gas, which can be dangerous to store at home. Additionally, welding machines create temperatures of over 3,000 degrees, and the sparks can blind you if you don’t have the proper equipment. As such, it’s usually better to hire a professional welder for your welding projects.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

The Tyner, NC homeowners’ guide to concrete cutting services

From average costs to expert advice, get all the answers you need to get your job done.