Top-rated fence painters.

Get matched with top fence painters in Stem, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Stem, NC?

Select your specific project to find the pro for you.

TRUSTED BY STEM, NC HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon363
    Verified fence painting services reviews

Find Fence painters in Stem

No results for Fence painter in

Try adjusting your search criteria.
Fence Painting questions, answered by experts

Maintain your wattle fence by inspecting it at least twice per year for loose weaving and degrading branches. Replace any seriously degraded sections, ensure water drains properly around the posts, and trim any sprouting branches if you used green wood. If you notice the weave loosening, you can often tighten it by gently pushing down on the top branches. You can also apply a natural wood preservative every two to three years to extend the fence's lifespan.

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

There’s no single paint that’s the most waterproof. Instead, there are several types of waterproof and water-resistant paints that suit different purposes. Epoxy paint, for instance, is commonly used to provide a waterproof coating to floors and decks. Masonry paint is an excellent choice for exterior walls. Meanwhile, there are waterproof acrylic paints that can be used for interior and exterior walls. It’s more about choosing the best type for what you’re painting instead of the most waterproof paint overall.

For the best results, you should apply two coats of paint to your wrought iron fence. Let your first coat dry for about an hour then promptly apply your second coat.

You can apply stain over peeling stain, but it’s not a good idea. Your old stain will get in the way of your new stain bonding to the wood, so you’re likely going to see the same issue again shortly after application. Your best option is to sand off the old stain and clean the surface thoroughly before applying new stain.

The Stem, NC homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.