Top-rated floor polishers.

Get matched with top floor polishers in Fountain, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Fountain, NC?

Select your specific project to find the pro for you.

Find Floor polishers in Fountain

Avatar for FletchersProClean
FletchersProClean
4.4(
7
)
Clean & Polish Flooring - For Business

Serving Fountain, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

"They are the best!!! I am telling you these guys are reputable and reliable. They show up on time everytime and do excellent work. They cleaned 8 of my properties in the triangle area and do routine cleaning for me as well and the results are impeccable 10 out 10 all the way across the board."
8000sq ft Cafeteria
8000sq ft Cafeteria
Classroom Cleaning
Bathroom Grout Cleaning
9 neighbors recently requested a quote
Avatar for Oden Pro Solutions
Oden Pro Solutions
New to Angi
Clean & Polish Flooring - For Business

Serving Fountain, NC and surrounding areas

Approved

Small jobs welcome

Offers commercial services

Family owned business with more than 10 years of cleaning experience. We mainly service Eastern and Central North Carolina but may be willing to travel to other regions. We strive for perfection, in our work, and to take some stress off of you!

5 neighbors recently requested a quote
Showing 1-10 of 46
Floor Polishers questions, answered by experts

Wood floors should be polished every two to four months to maintain a shine and to keep them protected from daily wear and tear. More frequent maintenance includes dry mopping the floors daily and cleaning spills immediately, using a spray mop and cleaner weekly to remove any built up dirt or grime, and sanding and refinishing the floors every three to five years.

Professionals use various tools and cleaning solutions based on the type of floor they’re cleaning. They often use industrial steam cleaners to pull debris out of the carpet. For localized stains, they may use a commercial cleaner or a mixture of water, vinegar, and dish soap. For tile, they’ll typically use dish soap and hot water, plus a mixture of baking soda and hot water for the grout. For cleaning wood floors, they might use a low-heat steamer, a mop with an oil wood floor cleaner, or a mixture of hot water, vinegar, and lemon juice.

Baking soda is an excellent choice for a natural dog urine neutralizer. You can sprinkle it on a stain, leave it overnight, and then vacuum it in the morning to help rid your hardwoods of the dog urine smell. Hydrogen peroxide is another odor neutralizer, but be careful not to mix it with other household cleaners.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

The Fountain, NC homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.