Get matched with top drain cleaners in Conover, NC

Plumbers use a variety of tools to help unclog the toughest of drain clogs, but the most common tools they use are drain snakes and augers. They try a plunger or drain snake to start, then move to heavy-duty augers, and finally try using a hydro jetter to blast away the clog with high-pressure water. Hiring a plumber to unclog a drain costs $125 to $300, largely depending on the extent and location of the clog and which of these methods is best for clearing it.

Yes, chemical drain cleaners contain sulfuric acid and hydrochloric acid, both of which are not only dangerous to your health but also extremely caustic. Drain cleaners will corrode your pipes and could lead to destroyed drain lines, especially if the chemicals interact with the piping for long periods. Unfortunately, this extended interaction is likely if you’re dealing with a clog, as the drain cleaner will have just as much trouble as water does moving through your plumbing system.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Yes, frozen pipes can cause a toilet to stop working correctly. If the pipes are frozen, water cannot flow, which can lead to two main problems. First, the supply line to the toilet tank may be frozen, which prevents the tank from refilling with water after you flush. Second, the drain pipe itself can freeze, blocking water from flushing away. As a temporary solution for a non-refilling tank, you can manually add water, but this is not a long-term fix. To clear a frozen drain pipe, you can try pouring warm water into the toilet bowl or tank and then flushing, as the warm water may help thaw the ice blockage. Ultimately, the best course of action is to unfreeze the affected pipes to restore your toilet to full functionality.