Top-rated fireplace cleaning pros.

Get matched with top fireplace cleaning pros in Atkinson, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your fireplace cleaning project in Atkinson, NC?

Select your specific project to find the pro for you.

Find Fireplace cleaning pros in Atkinson

Avatar for Shamrock Maintenance Corp
Shamrock Maintenance Corp
3.9(
15
)
Clean and Inspect a wood fireplace chimneyChimney or Fireplace - Clean and Inspect - For Business

Serving Atkinson, NC and surrounding areas

Approved

In business since 2015

Free estimates

Emergency services offered

"My home has a chimney that was unsafe to use (cracked masonry liner). I dreaded the time and cost of a tear down and replacement. I contacted "Shamrock Chimney" and scheduled an appointment with their lead technician "Tony". He suggested a less costly and safer alternative (steel liner and a resealing of the outer brickwork. The work was performed over a two-day period. I am fully satisfied with the results. One thing I really apricate is the communication during the project. The "front office" would let me know by either phone or email when the project would start, and then Tony and would give me updates. All and all the whole process went smoothly. Also, this was my first time with "Angi", I hope to use their services again in the future."
Chimney Repairs
Chimney Repairs
Chimney Repairs
Chimney Repairs
Chimney Repairs

+28

Response time12 hrs
Response rate100%
13 neighbors recently requested a quote
Avatar for Pure Cleaning
Pure Cleaning
New to Angi
Clean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Cleaning is my passion! Been cleaning for 30 years and love everything about it. Cleaning brings me inner peace calm, provides an instant sense of accomplishment, and creates a peaceful space to relax for my wonderful customers. Your support means the world to me so I always gifted my customers just a little something to say thank you.

1 neighbors recently requested a quote
Avatar for Frontpoint
Frontpoint
4.7(
8,819
)
Chimney or Fireplace - Clean and InspectChimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Once I had bought the deal on Angie's List, I received instructions via email to call Frontpoint directly to set it up. I called and spoke to Oscar, and the process was very smooth.  The email contained some order codes that let Oscar know exactly what I had purchased, and setup was quick from there.  He ran a credit check to confirm eligibility (it's a 3-yr contract), then had me set my intial PIN, Safety words, address, and credit card for billing.  That was it. 
It took 2 days to assemble my hardware package, and 2 more days for it to arrive.  The sensors, control panel, and manuals came assembled in a really nice flip-top display box.  Everything was numbered in order, like "do this first," etc.  The sensors were all numbered for easy reference.  All batteries were included.   It was really slick.
Setup of the hardware took about a half-hour; I was easily able to do it myself.  The sensors are peel-and-stick; deciding which doors and windows to target took longer than the actual installation.  The fire/smoke alarm is peel-and-stick.  The motion sensor is sitting right on our fireplace mantel.  I hung the control panel using included screws.  Everything is wireless; once the system was turned on, all the sensors were automatically detected.  Did I mention how slick it is?
I called Frontpoint at 10pm, just as they were clothing, and the assiciate was nonetheless very polite.  Activation took minutes.  He walked me through different methods of arming and disarming, and could see my system was responding correctly.  He gave me a 2hr delay in police activation so I could get used to the system without accidentally tripping it.  He even gave me the rest of the month (~5 days) free, and said billing would start at the first of the next month!  I checked my bill, and it's legit.  Again, very slick.
Once it was up and running, I got an email to set up my online account.  The website, contracted through alarm.com, is really nice. You can custom-name your sensors, set up email/text alerts, create additional users/PINs ... really nice.  I downloaded the App for Android, and it's also very nice.  You can arm/disarm and see the recent sensor history.  This, combined with the wireless setup, is WAY MORE than any of my friends have through ADT, Broadview, etc.  My system is the belle of the ball, at lower cost ($99 equipment, no setup fee, $42/mo, killer web functionality, DIY expansion).
So far, the first month has been great.  We left town for a week right after installing it, and gave someone one of the keyfobs so they could check on the house, and their own User PIN for emergencies (which we can deactivate any time).  They had no problems, and the alerts let us know exactly when they came and went (the keyfobs are labeled in the alerts).   The piece of mind is PRICELESS.  I'm glad we set this up before an incident, instead of after.
I hear that additional Z-wave sensors are very easy to add, and available through third parties as well as Frontpoint.  Additional window sensors, water leak sensors, pipe freeze sensors, you name it.  Even home-automation sensors, which can be controlled via the web and phone apps!  I look forward to getting some and trying them out.
Great job (so far) Frontpoint!
"
Recommended by93%of homeowners
Avatar for Colonial Way Home Services Inc
Colonial Way Home Services Inc
3.9(
201
)
Chimney or Fireplace - Clean and InspectChimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

In business since 1996

Free estimates

Emergency services offered

"I purchased a special deal through Angieslist, $99 for chimney sweep and $200 dollar worth of masonry/Chimney repair. The crew arrived on time and were very polite. When I showed them the woodburning stove insert they both seemed confused by it, they said they weren't familiar with inserts and weren't really sure how it worked. They cleaned it out but were not able to look in the chimney because of the way it was set up. One of the gentleman told me its fine to use as long as smoke doesn't start to come in the house. Obviously. I was under the impression that people that bill themselves as chimney sweeps would be able to figure out how to check out the actual chimney.
Our house has another chimney in the rear that is not in use. There are gaps in the brick where the mortar has fallen out. I figured I'd use the $200 credit towards having them pointed. The gentleman went up on the roof and inspected the chimney. He said the chimney needed to be capped, rain was getting in and that was causing the erosion. Makes sense, during my home inspection the previous year we were told to have it done somewhere down the line. He said he would cap the chimney and seal the concrete around the chimney on the roof for an additional $200. He said there was no need to point the brickwork once the chimney is capped. The guys went on the roof for maybe 15 minutes and installed the cap and I guess seal something or other. I don't have a 40' ladder to get on the roof and actually see what they did but it couldn't have been much as they were only up there a few minutes and I didn't see them carry up any concrete. I suspect they probably used mortar sealant caulk which is fine but doesn't really equate to the price charged. My main gripe is that I paid $500 (99, 200 credit, 200 at time of service) for them to vacuum my fireplace insert and install a cap (found on home depot.com for $80) on the chimney. I get the feeling that when you buy this $99 deal they not really honoring the $200 credit. I'm no expert on this sort of thing but I don't think the work that was performed was anywhere near $500 worth. I also got the feeling they were in a bit of a hurry and that's part of the reason they didn't want to do the pointing work. 
"
Reling System
Chimney cap
Chimney rebuild
Recommended by72%of homeowners
Avatar for C&D Home Services
C&D Home Services
4.4(
12
)
Chimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

Free estimates

Emergency services offered

Warranties offered

Welcome to C&D Home Services — Wilmington & Leland’s trusted choice for professional pressure washing and exterior cleaning. We specialize in house washing, driveway cleaning, window washing, soft washing, and more. Our goal is simple: deliver high-quality results, honest service, and make your property look brand new again. Whether it’s residential or commercial, we take pride in every job and treat your property like our own. Contact us today for a free estimate and let us bring your curb appeal back to life!

Pressure Washing!
Pressure Washing!
Pressure Washing!
82 neighbors recently requested a quote
Avatar for All States Air Duct Pro
All States Air Duct Pro
3.1(
236
)
Chimney or Fireplace - Clean and InspectChimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

In business since 1995

Free estimates

Emergency services offered

"The discount offered through Angie's list was to clean the vents. The company claimed that that would not be sufficient and that our entire system, including the furnace and air conditioner, would need thorough cleaning.
This larger job cost a lot more than we expected so we cancelled the job altogether.
"
Before & After Air Duct Cleaning
Recommended by49%of homeowners
Avatar for Turner Handyman Service
Turner Handyman Service
3.0(
12
)
Chimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney

Serving Atkinson, NC and surrounding areas

In business since 2003

Free estimates

Credit card accepted

is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers interests, and make their concerns the basis of our business. Turner Handyman Service has been in business for 18 years. Snow time has come and we are able to take care of any of you plowing needs. We do work for residential and business locations for a low price of $199. Please give us a call for any of your needs.

Response time1 day
Recommended by33%of homeowners
Showing 1-10 of 18
Fireplace Cleaners questions, answered by experts

You should use an angled brush to first paint the mortar lines, then go in with a high-density roller to evenly paint the bricks one at a time. You can also use a flat paintbrush to paint individual bricks, but a roller is faster and easier to use thanks to its longer handle and wider surface area for coating the bricks. To finish, go in with the paint brush for edges or hard-to-reach areas.

A hearth often looks like a tile or brick floor that juts out from and surrounds your fireplace. A hearth can be made of stone, brick, ceramic, or any other fireproof material. Brick offers a classic and traditional vibe, whereas a hearth made of marble or ceramic may lean more toward modern aesthetics. The most common depth of a hearth is 20 inches.

No, you can't apply limewash with a roller and expect good results. Limewash is as much a technique as it is a type of paint, and a freehand application with a brush is part of that technique. Hand brushing a large area can be tiring, but limewash goes on easily and only requires thin coats to be effective.

Limewash and whitewash are two techniques used to give brick a light, matte finish, but they differ in composition, application, and permanence. The best choice depends on your aesthetic goals and the specific surface.

Composition

  • Limewash: A natural and environmentally friendly option made from limestone, water, and sometimes pigments. It is breathable and soaks into porous surfaces like brick.

  • Whitewash: Traditionally made from lime, water, chalk, and binders, but a similar look can be achieved with watered-down white paint. It is paint-based and sits on top of the surface.

Appearance and Finish

  • Limewash: Provides a natural, textured appearance that allows the brick's character to show through. It offers a more traditional finish.

  • Whitewash: Creates a softer, more opaque finish, often used for a rustic or shabby-chic style.

Application and Permanence

  • Limewash: Is semi-permanent and can be removed, making it a good choice if you might want to change the look in the future. It requires more skill to apply and cannot be used on previously painted brick.

  • Whitewash: Is a more permanent solution. It is more forgiving to apply and can be used on painted brick. However, because it sits on the surface, it can trap moisture.

Ultimately, if you want a breathable, natural, and reversible finish for unpainted brick, limewash is a great option. If you need a more permanent, opaque coating that can be applied over painted surfaces, whitewash is the better choice. Whitewashing may also be more economical, costing approximately $1.40 to $4.20 per square foot.

You may be wondering: can you paint cement? Fortunately, the answer is yes.

To change the color of your cinder blocks, you have two options. You can either paint them or stain them. Either way, you'll be able to choose from a wide range of color options. Some popular colors for cinder block painting include off-white shades and gray tones, which add a modern spin to the traditional gray blocks.

The Atkinson, NC homeowners’ guide to fireplace cleaning services

From average costs to expert advice, get all the answers you need to get your job done.