Get matched with top bathtub restoration pros in Jordan, MT

Yes, you can use a dremel tool to cut plexiglass. Follow the instructions under “How to Cut Plexiglass with a Saw,” and use a dremel tool with a 561 bit instead of a saw.

While they’re heavier than their counterparts, cast-iron tubs are very simple to maintain. They have no seams and are durable, making them the easiest tub to maintain. While fiberglass and acrylic tubs are also relatively simple to maintain, they often have seams, making maintenance a little more difficult.

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.